Sazerac Cabled Knit Sweater – Marly Bird First Fall 2023
Designed by Marly Bird
SKILL LEVEL
Adventurous Beginner / Intermediate
MEASUREMENTS
To Fit Sizes
XS/S (M/L , XL/2X, 3X/4X, 5X/6X)
Bust circumference
28-35 (36-43, 44-51, 52-59, 60-67)″ [71-89 (91.5-109, 112-129.5, 132-150, 152.5-170) cm]
Finished Measurements
Bust 36 (42, 51, 57, 66)” [91.5 (106.5, 129.5, 145, 167.5) cm]
Length 21¾ (22, 24¼ , 24¼ , 27½)” [55 (56, 61.5, 61.5, 70) cm]
Gauge
16 sts and 22 rounds = 4″ [10 cm] in Cable Panels using larger needles.
MATERIALS
Yarn
Queensland Collection, Uruguay Chunky (70% Wool/ 20% Alpaca/ 10% Silk, 73 yd /67 m balls, 1.75 oz /50 g, CYCA# 5 bulky): #104 Sunset
Note: sample yarn has been discontinued. See suggested yarns for substitutions.
Suggested Yarn
675 (800, 1075, 1200, 1575) yds / 617 (732, 983, 1097, 1440) m:
- Knit Picks, Wool of the Andes Bulky
- Knit Picks, Wool of the Andes Superwash Bulky
- Knit Picks, Swish Bulky
- Malabrigo, Chunky Yarn
- Berroco Ultra Wool Chunky Yarn
Needles
Size US 9 [5.5 mm] long circular needle (to fit around desired bust measurement), or size required for gauge.
Notions
Removable stitch markers in two different colors or designs, cable needle, stitch holders, tapestry needle.
ABBREVIATIONS
K – Knit
P – Purl
Pm – Place Marker
RS – Right Side
Slm – Slip Marker
St(s) – Stitches
WS – Wrong Side
SPECIAL STITCHES
M1 (Make 1 Increase): With tip of left needle, pick up the horizontal strand between sts from front to back. Knit this strand through the back loop or leg thus, twisting it into a loop in the process.
CABLE STITCHES
2/1 RC (2/1 Right Cable): Slip 1 st onto cable needle and hold in back, k2 from left hand needle, k1 from cable needle.
2/1 RPC (2/1 Right Purl Cable): Slip 1 st onto cable needle and hold in back, k2 from left hand needle, p1 from cable needle.
2/1 LC (2/1 Left Cable): Slip 2 sts onto cable needle and hold in front, k1 from left hand needle, k2 from cable needle.
2/1 LPC (2/1 Left Purl Cable): Slip 2 sts onto cable needle and hold in front, p1 from left hand needle, k2 from cable needle.
2/2 RC (2/2 Right Cable): Slip 2 sts onto cable needle and hold in back, k2 from left hand needle, k2 from cable needle.
3/3 RC (3/3 Right Cable): Slip 3 sts onto cable needle and hold in back, k3 from left hand needle, k3 from cable needle.
PATTERN STITCHES
Seed Stitch
Worked FLAT over an even number of sts:
Row 1: * K1, p1; repeat from * to end.
Row 2: * P1, k1; repeat from * to end.
Repeat Rows 1 and 2 for Seed Stitch worked flat.
Worked in the ROUND over an even number of sts:
Row 1: * K1, p1; repeat from * to end.
Row 2: * P1, k1; repeat from * to end.
Repeat Rounds 1 and 2 for Seed Stitch in the round.
Cable Panels
✨XS/S Cable Panel
Worked in the ROUND over 24 sts:
Round 1: K4, p4, 2/1 RPC, k6, 2/1 LPC, p4.
Round 2: K4, p4, k3, p1, k4, p1, k3, p4.
Round 3: 2/2 RC, p3, 2/1 RC, p1, k1, 2/2 RC, k1, p1, 2/1 LC, p3.
Round 4: K4, p3, k2, p1, k1, p1, k4, p1, k1, p1, k2, p3.
Round 5: K4, p2, 2/1 RPC, k1, p1, k6, p1, k1, 2/1 LPC, p2.
Round 6: K4, p2, k3, p1, k1, p1, k4, p1, k1, p1, k3, p2.
Round 7: 2/2 RC, p1, 2/1 RC, [p1, k1] twice, 2/2 RC, [k1, p1] twice, 2/1 LC, p1.
Round 8: K4, p1, k2, [p1, k1] twice, p1, k4, [p1, k1] twice, p1, k2, p1.
Round 9: K4, p1, 2/1 LPC, p1, k1, p1, k6, p1, k1, p1, 2/1 RPC, p1.
Round 10: K4, p2, k3, p1, k1, p1, k4, p1, k1, p1, k3, p2.
Round 11: 2/2 RC, p2, 2/1 LPC, k1, p1, k1, 2/2 RC, k1, p1, k1, 2/1 RPC, p2.
Round 12: K4, p3, k2, p1, k1, p1, k4, p1, k1, p1, k2, p3.
Round 13: K4, p3, 2/1 LPC, p1, k6, p1, 2/1 RPC, p3.
Round 14: K4, p4, k3, p1, k4, p1, k3, p4.
Round 15: 2/2 RC, p4, 2/1 LPC, k1, 2/2 RC, k1, 2/1 RPC, p4.
Round 16: K4, p5, k2, p1, k4, p1, k2, p5.
Repeat Rounds 1-16 for XS/S Cable Panel in the round.
XS/S Cable Panel
Worked FLAT over 24 sts:
Row 1 (RS): K4, p4, 2/1 RPC, k6, 2/1 LPC, p4.
Row 2: K4, p3, k1, p4, k1, p3, k4, p4.
Row 3: 2/2 RC, p3, 2/1 RC, p1, k1, 2/2 RC, k1, p1, 2/1 LC, p3.
Row 4: K3, p2, k1, p1, k1, p4, k1, p1, k1, p2, k3, p4.
Row 5: K4, p2, 2/1 RPC, k1, p1, k6, p1, k1, 2/1 LPC, p2.
Row 6: K2, p3, k1, p1, k1, p4, k1, p1, k1, p3, k2, p4.
Row 7: 2/2 RC, p1, 2/1 RC, [p1, k1] twice, 2/2 RC, [k1, p1] twice, 2/1 LC, p1.
Row 8: K1, p2, [k1, p1] twice, k1, p4, [k1, p1] twice, k1, p2, k1, p4.
Row 9: K4, p1, 2/1 LPC, [p1, k1] twice, k4, [k1, p1] twice, 2/1 RPC, p1.
Row 10: K2, p3, k1, p1, k1, p4, k1, p1, k1, p3, k2, p4.
Row 11: 2/2 RC, p2, 2/1 LPC, k1, p1, k1, 2/2 RC, k1, p1, k1, 2/1 RPC, p2.
Row 12: K3, p2, k1, p1, k1, p4, k1, p1, k1, p2, k3, p4.
Row 13: K4, p3, 2/1 LPC, p1, k6, p1, 2/1 RPC, p3.
Row 14: K4, p3, k1, p4, k1, p3, k4, p4.
Row 15: 2/2 RC, p4, 2/1 LPC, k1, 2/2 RC, k1, 2/1 RPC, p4.
Row 16: K5, p2, k1, p4, k1, p2, k5, p4.
Repeat Rows 1-16 for XS/S Cable Panel worked flat.
✨M/L Cable Panel
Worked in the ROUND over 28 sts:
Round 1: K4, p6, 2/1 RPC, k6, 2/1 LPC, p6.
Round 2: K4, p6, k3, p1, k4, p1, k3, p6.
Round 3: 2/2 RC, p5, 2/1 RC, p1, k1, 2/2 RC, k1, p1, 2/1 LC, p5.
Round 4: K4, p5, k2, p1, k1, p1, k4, p1, k1, p1, k2, p5.
Round 5: K4, p4, 2/1 RPC, k1, p1, k6, p1, k1, 2/1 LPC, p4.
Round 6: K4, p4, k3, p1, k1, p1, k4, p1, k1, p1, k3, p4.
Round 7: 2/2 RC, p3, 2/1 RC, [p1, k1] twice, 2/2 RC, [k1, p1] twice, 2/1 LC, p3.
Round 8: K4, p3, k2, [p1, k1] twice, p1, k4, [p1, k1] twice, p1, k2, p3.
Round 9: K4, p2, 2/1 RPC, [k1, p1] twice, k6, [p1, k1] twice, 2/1 LPC, p2.
Round 10: K4, p2, k3, [p1, k1] twice, p1, k4, [p1, k1] twice, p1, k3, p2.
Round 11: 2/2 RC, p2, 2/1 LPC, [k1, p1] twice, k1, 2/2 RC, [k1, p1] twice, k1, 2/1 RPC, p2.
Round 12: K4, p3, k2, [p1, k1] twice, p1, k4, [p1, k1] twice, p1, k2, p3.
Round 13: K4, p3, 2/1 LPC, p1, k1, p1, k6, p1, k1, p1, 2/1 RPC, p3.
Round 14: K4, p4, k3, p1, k1, p1, k4, p1, k1, p1, k3, p4.
Round 15: 2/2 RC, p4, 2/1 LPC, k1, p1, k1, 2/2 RC, k1, p1, k1, 2/1 RPC, p4.
Round 16: K4, p5, k2, p1, k1, p1, k4, p1, k1, p1, k2, p5.
Round 17: K4, p5, 2/1 LPC, p1, k6, p1, 2/1 RPC, p5.
Round 18: K4, p6, k3, p1, k4, p1, k3, p6.
Round 19: 2/2 RC, p6, 2/1 LPC, k1, 2/2 RC, k1, 2/1 RPC, p6.
Round 20: K4, p7, k2, p1, k4, p1, k2, p7.
Repeat Rounds 1-20 for M/L Cable Panel in the round.
M/L Cable Panel
Worked FLAT over 28 sts:
Row 1 (RS): K4, p6, 2/1 RPC, k6, 2/1 LPC, p6.
Row 2: K6, p3, k1, p4, k1, p3, k6, p4.
Row 3: 2/2 RC, p5, 2/1 RC, p1, k1, 2/2 RC, k1, p1, 2/1 LC, p5.
Row 4: K5, p2, k1, p1, k1, p4, k1, p1, k1, p2, k5, p4.
Row 5: K4, p4, 2/1 RPC, k1, p1, k6, p1, k1, 2/1 LPC, p4.
Row 6: K4, p3, k1, p1, k1, p4, k1, p1, k1, p3, k4, p4.
Row 7: 2/2 RC, p3, 2/1 RC, [p1, k1] twice, 2/2 RC, [k1, p1] twice, 2/1 LC, p3.
Row 8: K3, p2, [k1, p1] twice, k1, p4, [k1, p1] twice, k1, p2, k3, p4.
Row 9: K4, p2, 2/1 RPC, [k1, p1] twice, k6, [p1, k1] twice, 2/1 LPC, p2.
Row 10: K2, p3, [k1, p1] twice, k1, p4, [k1, p1] twice, k1, p3, k2, p4.
Row 11: 2/2 RC, p2, 2/1 LPC, [k1, p1] twice, k1, 2/2 RC, [k1, p1] twice, k1, 2/1 RPC, p2.
Row 12: K3, p2, [k1, p1] twice, k1, p4, [k1, p1] twice, k1, p2, k3, p4.
Row 13: K4, p3, 2/1 LPC, p1, k1, p1, k6, p1, k1, p1, 2/1 RPC, p3.
Row 14: K4, p3, k1, p1, k1, p4, k1, p1, k1, p3, k4, p4.
Row 15: 2/2 RC, p4, 2/1 LPC, k1, p1, k1, 2/2 RC, k1, p1, k1, 2/1 RPC, p4.
Row 16: K5, p2, k1, p1, k1, p4, k1, p1, k1, p2, k5, p4.
Row 17: K4, p5, 2/1 LPC, p1, k6, p1, 2/1 RPC, p5.
Row 18: K6, p3, k1, p4, k1, p3, k6, p4.
Row 19: 2/2 RC, p6, 2/1 LPC, k1, 2/2 RC, k1, 2/1 RPC, p6.
Row 20: K7, p2, k1, p4, k1, p2, k7, p4.
Repeat Rows 1-20 for M/L Cable Panel worked flat.
✨XL/2X Cable Panel
Worked in the ROUND over 34 sts:
Round 1: K6, p7, 2/1 RPC, k8, 2/1 LPC, p7.
Round 2: K6, p7, k3, p1, k6, p1, k3, p7.
Round 3: 3/3 RC, p6, 2/1 RC, p1, k1, 3/3 RC, k1, p1, 2/1 LC, p6.
Round 4: K6, p6, k2, p1, k1, p1, k6, p1, k1, p1, k2, p6.
Round 5: K6, p5, 2/1 RPC, k1, p1, k8, p1, k1, 2/1 LPC, p5.
Round 6: K6, p5, k3, p1, k1, p1, k6, p1, k1, p1, k3, p5.
Round 7: K6, p4, 2/1 RC, p1, k1, p1, k8, p1, k1, p1, 2/1 LC, p4.
Round 8: K6, p4, k2, [p1, k1] twice, p1, k6, [p1, k1] twice, p1, k2, p4.
Round 9: 3/3 RC, p3, 2/1 RPC, [k1, p1] twice, k1, 3/3 RC, [k1, p1] twice, k1, 2/1 LPC, p3.
Round 10: K6, p3, k3, [p1, k1] twice, p1, k6, [p1, k1] twice, p1, k3, p3.
Round 11: K6, p2, 2/1 RC, [p1, k1] twice, p1, k8, [p1, k1] twice, p1, 2/1 LC, p2.
Round 12: K6, p2, k4, [p1, k1] twice, p1, k6, [p1, k1] twice, p1, k4, p2.
Round 13: K6, p2, 2/1 LPC, [p1, k1] twice, p1, k8, [p1, k1] twice, p1, 2/1 RPC, p2.
Round 14: K6, p3, k3, [p1, k1] twice, p1, k6, [p1, k1] twice, p1, k3, p3.
Round 15: 3/3 RC, p3, 2/1 LPC, [k1, p1] twice, k1, 3/3 RC, [k1, p1] twice, k1, 2/1 RPC, p3.
Round 16: K6, p4, k2, [p1, k1] twice, p1, k6, [p1, k1] twice, p1, k2, p4.
Round 17: K6, p4, 2/1 LPC, p1, k1, p1, k8, p1, k1, p1, 2/1 RPC, p4.
Round 18: K6, p5, k3, p1, k1, p1, k6, p1, k1, p1, k3, p5.
Round 19: K6, p5, 2/1 LPC, k1, p1, k8, p1, k1, 2/1 RPC, p5.
Round 20: K6, p6, k2, p1, k1, p1, k6, p1, k1, p1, k2, p6.
Round 21: 3/3 RC, p6, 2/1 LPC, p1, k1, 3/3 RC, k1, p1, 2/1 RPC, p6.
Round 22: K6, p7, k3, p1, k6, p1, k3, p7.
Round 23: K6, p7, 2/1 LPC, k8, 2/1 RPC, p7.
Round 24: K6, p8, k2, p1, k6, p1, k2, p8.
Repeat Rounds 1-24 for XL/2X Cable Panel in the round.
XL/2X Cable Panel
Worked FLAT over 34 sts:
Row 1 (RS): K6, p7, 2/1 RPC, k8, 2/1 LPC, p7.
Row 2: K7, p3, k1, p6, k1, p3, k7, p6.
Row 3: 3/3 RC, p6, 2/1 RC, p1, k1, 3/3 RC, k1, p1, 2/1 LC, p6.
Row 4: K6, p2, k1, p1, k1, p6, k1, p1, k1, p2, k6, p6.
Row 5: K6, p5, 2/1 RPC, k1, p1, k8, p1, k1, 2/1 LPC, p5.
Row 6: K5, p3, k1, p1, k1, p6, k1, p1, k1, p3, k5, p6.
Row 7: K6, p4, 2/1 RC, p1, k1, p1, k8, p1, k1, p1, 2/1 LC, p4.
Row 8: K4, p2, [k1, p1] twice, k1, p6, [k1, p1] twice, k1, p2, k4, p6.
Row 9: 3/3 RC, p3, 2/1 RPC, [k1, p1] twice, k1, 3/3 RC, [k1, p1] twice, k1, 2/1 LPC, p3.
Row 10: K3, p3, [k1, p1] twice, k1, p6, [k1, p1] twice, k1, p3, k3, p6.
Row 11: K6, p2, 2/1 RC, [p1, k1] twice, p1, k8, [p1, k1] twice, p1, 2/1 LC, p2.
Row 12: K2, p4, [k1, p1] twice, k1, p6, [k1, p1] twice, k1, p4, k2, p6.
Row 13: K6, p2, 2/1 LPC, [p1, k1] twice, p1, k8, [p1, k1] twice, p1, 2/1 RPC, p2.
Row 14: K3, p3, [k1, p1] twice, k1, p6, [k1, p1] twice, k1, p3, k3, p6.
Row 15: 3/3 RC, p3, 2/1 LPC, [k1, p1] twice, k1, 3/3 RC, [k1, p1] twice, k1, 2/1 RPC, p3.
Row 16: K4, p2, [k1, p1] twice, k1, p6, [k1, p1] twice, k1, p2, k4, p6.
Row 17: K6, p4, 2/1 LPC, p1, k1, p1, k8, p1, k1, p1, 2/1 RPC, p4.
Row 18: K5, p3, k1, p1, k1, p6, k1, p1, k1, p3, k5, p6.
Row 19: K6, p5, 2/1 LPC, k1, p1, k8, p1, k1, 2/1 RPC, p5.
Row 20: K6, p2, k1, p1, k1, p6, k1, p1, k1, p2, k6, p6.
Row 21: 3/3 RC, p6, 2/1 LPC, p1, k1, 3/3 RC, k1, p1, 2/1 RPC, p6.
Row 22: K7, p3, k1, p6, k1, p3, k7, p6.
Row 23: K6, p7, 2/1 LPC, k8, 2/1 RPC, p7.
Row 24: K8, p2, k1, p6, k1, p2, k8, p6.
Repeat Rows 1-24 for XL/2X Cable Panel worked flat.
✨3X/4X Cable Panel
Worked in the ROUND over 38 sts:
Round 1: K6, p8, 2/1 RPC, k1, p1, k6, p1, k1, 2/1 LPC, p8.
Round 2: K6, p8, k3, p1, k8, p1, k3, p8.
Round 3: 3/3 RC, p7, 2/1 RC, p1, k1, p1, 3/3 RC, p1, k1, p1, 2/1 LC, p7.
Round 4: K6, p7, k2, p1, k1, p1, k8, p1, k1, p1, k2, p7.
Round 5: K6, p6, 2/1 RPC, [k1, p1] twice, k6, [p1, k1] twice, 2/1 LPC, p6.
Round 6: K6, p6, k3, p1, k1, p1, k8, p1, k1, p1, k3, p6.
Round 7: K6, p5, 2/1 RC, [p1, k1] twice, p1, k6, [p1, k1] twice, p1, 2/1 LC, p5.
Round 8: K6, p5, k2, [p1, k1] twice, p1, k8, [p1, k1] twice, p1, k2, p5.
Round 9: 3/3 RC, p4, 2/1 RPC, [k1, p1] 3 times, 3/3 RC, [p1, k1] 3 times, 2/1 LPC, p4.
Round 10: K6, p4, k3, [p1, k1] twice, p1, k8, [p1, k1] twice, p1, k3, p4.
Round 11: K6, p3, 2/1 RC, [p1, k1] 3 times, p1, k6, [p1, k1] 3 times, p1, 2/1 LC, p3.
Round 12: K6, p3, k2, [p1, k1] 3 times, p1, k8, [p1, k1] 3 times, p1, k2, p3.
Round 13: K6, p3, 2/1 LPC, [p1, k1] 3 times, p1, k6, [p1, k1] 3 times, p1, 2/1 RPC, p3.
Round 14: K6, p4, k3, [p1, k1] twice, p1, k8, [p1, k1] twice, p1, k3, p4.
Round 15: 3/3 RC, p4, 2/1 LPC, [k1, p1] 3 times, 3/3 RC, [p1, k1] 3 times, 2/1 RPC, p4.
Round 16: K6, p5, k2, [p1, k1] twice, p1, k8, [p1, k1] twice, p1, k2, p5.
Round 17: K6, p5, 2/1 LPC, [p1, k1] twice, p1, k6, [p1, k1] twice, p1, 2/1 RPC, p5.
Round 18: K6, p6, k3, p1, k1, p1, k8, p1, k1, p1, k3, p6.
Round 19: K6, p6, 2/1 LPC, [k1, p1] twice, k6, [p1, k1] twice, 2/1 RPC, p6.
Round 20: K6, p7, k2, p1, k1, p1, k8, p1, k1, p1, k2, p7.
Round 21: 3/3 RC, p7, 2/1 LPC, p1, k1, p1, 3/3 RC, p1, k1, p1, 2/1 RPC, p7.
Round 22: K6, p8, k3, p1, k8, p1, k3, p8.
Round 23: K6, p8, 2/1 LPC, k1, p1, k6, p1, k1, 2/1 RPC, p8.
Round 24: K6, p9, k2, p1, k8, p1, k2, p9.
Repeat Rounds 1-24 for 3X/4X Cable Panel in the round.
3X/4X Cable Panel
Worked FLAT over 38 sts:
Row 1 (RS): K6, p8, 2/1 RPC, k1, p1, k6, p1, k1, 2/1 LPC, p8.
Row 2: K8, p3, k1, p8, k1, p3, k8, p6.
Row 3: 3/3 RC, p7, 2/1 RC, p1, k1, p1, 3/3 RC, p1, k1, p1, 2/1 LC, p7.
Row 4: K7, p2, k1, p1, k1, p8, k1, p1, k1, p2, k7, p6.
Row 5: K6, p6, 2/1 RPC, [k1, p1] twice, k6, [p1, k1] twice, 2/1 LPC, p6.
Row 6: K6, p3, k1, p1, k1, p8, k1, p1, k1, p3, k6, p6.
Row 7: K6, p5, 2/1 RC, [p1, k1] twice, p1, k6, [p1, k1] twice, p1, 2/1 LC, p5.
Row 8: K5, p2, [k1, p1] twice, k1, p8, [k1, p1] twice, k1, p2, k5, p6.
Row 9: 3/3 RC, p4, 2/1 RPC, [k1, p1] 3 times, 3/3 RC, [p1, k1] 3 times, 2/1 LPC, p4.
Row 10: K4, p3, [k1, p1] twice, k1, p8, [k1, p1] twice, k1, p3, k4, p6.
Row 11: K6, p3, 2/1 RC, [p1, k1] 3 times, p1, k6, [p1, k1] 3 times, p1, 2/1 LC, p3.
Row 12: K3, p2, [k1, p1] 3 times, k1, p8, [k1, p1] 3 times, k1, p2, k3, p6.
Row 13: K6, p3, 2/1 LPC, [p1, k1] 3 times, p1, k6, [p1, k1] 3 times, p1, 2/1 RPC, p3.
Row 14: K4, p3, [k1, p1] twice, k1, p8, [k1, p1] twice, k1, p3, k4, p6.
Row 15: 3/3 RC, p4, 2/1 LPC, [k1, p1] 3 times, 3/3 RC, [p1, k1] 3 times, 2/1 RPC, p4.
Row 16: K5, p2, k1, [p1, k1] twice, p8, [k1, p1] twice, k1, p2, k5, p6.
Row 17: K6, p5, 2/1 LPC, [p1, k1] twice, p1, k6, [p1, k1] twice, p1, 2/1 RPC, p5.
Row 18: K6, p3, k1, p1, k1, p8, k1, p1, k1, p3, k6, p6.
Row 19: K6, p6, 2/1 LPC, [k1, p1] twice, k6, [p1, k1] twice, 2/1 RPC, p6.
Row 20: K7, p2, k1, p1, k1, p8, k1, p1, k1, p2, k7, p6.
Row 21: 3/3 RC, p7, 2/1 LPC, p1, k1, p1, 3/3 RC, p1, k1, p1, 2/1 RPC, p7.
Row 22: K8, p3, k1, p8, k1, p3, k8, p6.
Row 23: K6, p8, 2/1 LPC, k1, p1, k6, p1, k1, 2/1 RPC, p8.
Row 24: K9, p2, k1, p8, k1, p2, k9, p6.
Repeat Rows 1-24 for 3X/4X Cable Panel worked flat.
✨5X/6X Cable Panel
Worked in the ROUND over 44 sts:
Round 1: K6, p10, 2/1 RPC, k1, p1, k8, p1, k1, 2/1 LPC, p10.
Round 2: K6, p10, k3, p1, k1, p1, k6, p1, k1, p1, k3, p10.
Round 3: 3/3 RC, p9, 2/1 RC, [p1, k1] twice, 3/3 RC, [k1, p1] twice, 2/1 LC, p9.
Round 4: K6, p9, k2, p1, [k1, p1] twice, k6, [p1, k1] twice, p1, k2, p9.
Round 5: K6, p8, 2/1 RPC, [k1, p1] twice, k8, [p1, k1] twice, 2/1 LPC, p8.
Round 6: K6, p8, k3, [p1, k1] twice, p1, k6, [p1, k1] twice, p1, k3, p8.
Round 7: 3/3 RC, p7, 2/1 RC, [p1, k1] 3 times, 3/3 RC, [k1, p1] 3 times, 2/1 LC, p7.
Round 8: K6, p7, k2, p1, [k1, p1] 3 times, k6, [p1, k1] 3 times, p1, k2, p7.
Round 9: K6, p6, 2/1 RPC, [k1, p1] 3 times, k8, [p1, k1] 3 times, 2/1 LPC, p6.
Round 10: K6, p6, k3, [p1, k1] 3 times, p1, k6, [p1, k1] 3 times, p1, k3, p6.
Round 11: 3/3 RC, p5, 2/1 RC, [p1, k1] 4 times, 3/3 RC, [k1, p1] 4 times, 2/1 LC, p5.
Round 12: K6, p5, k2, p1, [k1, p1] 4 times, k6, [p1, k1] 4 times, p1, k2, p5.
Round 13: K6, p4, 2/1 RPC, [k1, p1] 4 times, k8, [p1, k1] 4 times, 2/1 LPC, p4.
Round 14: K6, p4, k3, [p1, k1] 4 times, p1, k6, [p1, k1] 4 times,p1, k3, p4.
Round 15: 3/3 RC, p4, 2/1 LPC, [k1, p1] 4 times, k1, 3/3 RC, [k1, p1] 4 times, k1, 2/1 RPC, p4.
Round 16: K6, p5, k2, p1, [k1, p1] 4 times, k6, [p1, k1] 4 times, p1, k2, p5.
Round 17: K6, p5, 2/1 LPC, [p1, k1] 3 times, p1, k8, p1, [k1, p1] 3 times, 2/1 RPC, p5.
Round 18: K6, p6, k3, [p1, k1] 3 times, p1, k6, [p1, k1] 3 times, p1, k3, p6.
Round 19: 3/3 RC, p6, 2/1 LPC, [k1, p1] 3 times, k1, 3/3 RC, [k1, p1] 3 times, k1, 2/1 RPC, p6.
Round 20: K6, p7, k2, p1, [k1, p1] 3 times, k6, [p1, k1] 3 times, p1, k2, p7.
Round 21: K6, p7, 2/1 LPC, [p1, k1] twice, p1, k8, p1, [k1, p1] twice, 2/1 RPC, p7.
Round 22: K6, p8, k3, [p1, k1] twice, p1, k6, [p1, k1] twice, p1, k3, p8.
Round 23: 3/3 RC, p8, 2/1 LPC, [k1, p1] twice, k1, 3/3 RC, [k1, p1] twice, k1, 2/1 RPC, p8.
Round 24: K6, p9, k2, p1, [k1, p1] twice, k6, [p1, k1] twice, p1, k2, p9.
Round 25: K6, p9, 2/1 LPC, p1, k1, p1, k8, p1, k1, p1, 2/1 RPC, p9.
Round 26: K6, p10, k3, p1, k1, p1, k6, p1, k1, p1, k3, p10.
Round 27: 3/3 RC, p10, 2/1 LPC, k1, p1, k1, 3/3 RC, k1, p1, k1, 2/1 RPC, p10.
Round 28: K6, p11, k2, p1, k1, p1, k6, p1, k1, p1, k2, p11.
Repeat Rounds 1-28 for 5X/6X Cable Panel in the round.
5X/6X Cable Panel
Worked FLAT over 44 sts:
Row 1 (RS): K6, p10, 2/1 RPC, k1, p1, k8, p1, k1, 2/1 LPC, p10.
Row 2: K10, p3, k1, p1, k1, p6, k1, p1, k1, p3, k10, p6.
Row 3: 3/3 RC, p9, 2/1 RC, [p1, k1] twice, 3/3 RC, [k1, p1] twice, 2/1 LC, p9.
Row 4: K9, p2, [k1, p1] twice, k1, p6, [k1, p1] twice, k1, p2, k9, p6.
Row 5: K6, p8, 2/1 RPC, [k1, p1] twice, k8, [p1, k1] twice, 2/1 LPC, p8.
Row 6: K8, p3, [k1, p1] twice, k1, p6, [k1, p1] twice, k1, p3, k8, p6.
Row 7: 3/3 RC, p7, 2/1 RC, [p1, k1] 3 times, 3/3 RC, [k1, p1] 3 times, 2/1 LC, p7.
Row 8: K7, p2, k1, [p1, k1] 3 times, p6, [k1, p1] 3 times, k1, p2, k7, p6.
Row 9: K6, p6, 2/1 RPC, [k1, p1] 3 times, k8, [p1, k1] 3 times, 2/1 LPC, p6.
Row 10: K6, p3, [k1, p1] 3 times, k1, p6, [k1, p1] 3 times, k1, p3, k6, p6.
Row 11: 3/3 RC, p5, 2/1 RC, [p1, k1] 4 times, 3/3 RC, [k1, p1] 4 times, 2/1 LC, p5.
Row 12: K5, p2, k1, [p1, k1] 4 times, p6, [k1, p1] 4 times, k1, p2, k5, p6.
Row 13: K6, p4, 2/1 RPC, [k1, p1] 4 times, k8, [p1, k1] 4 times, 2/1 LPC, p4.
Row 14: K4, p3, [k1, p1] 4 times, k1, p6, [k1, p1] 4 times, k1, p3, k4, p6.
Row 15: 3/3 RC, p4, 2/1 LPC, [k1, p1] 4 times, k1, 3/3 RC, [k1, p1] 4 times, k1, 2/1 RPC, p4.
Row 16: K5, p2, k1, [p1, k1] 4 times, p6, [k1, p1] 4 times, k1, p2, k5, p6.
Row 17: K6, p5, 2/1 LPC, [p1, k1] 3 times, p1, k8, p1, [k1, p1] 3 times, 2/1 RPC, p5.
Row 18: K6, p3, [k1, p1] 3 times, k1, p6, [k1, p1] 3 times, k1, p3, k6, p6.
Row 19: 3/3 RC, p6, 2/1 LPC, [k1, p1] 3 times, k1, 3/3 RC, [k1, p1] 3 times, k1, 2/1 RPC, p6.
Row 20: K7, p2, k1, [p1, k1] 3 times, p6, [k1, p1] 3 times, k1, p2, k7, p6.
Row 21: K6, p7, 2/1 LPC, [p1, k1] twice, p1, k8, p1, [k1, p1] twice, 2/1 RPC, p7.
Row 22: K8, p3, [k1, p1] twice, k1, p6, [k1, p1] twice, k1, p3, k8, p6.
Row 23: 3/3 RC, p8, 2/1 LPC, [k1, p1] twice, k1, 3/3 RC, [k1, p1] twice, k1, 2/1 RPC, p8.
Row 24: K9, p2, [k1, p1] twice, k1, p6, [k1, p1] twice, k1, p2, k9, p6.
Row 25: K6, p9, 2/1 LPC, p1, k1, p1, k8, p1, k1, p1, 2/1 RPC, p9.
Row 26: K10, p3, k1, p1, k1, p6, k1, p1, k1, p3, k10, p6.
Row 27: 3/3 RC, p10, 2/1 LPC, k1, p1, k1, 3/3 RC, k1, p1, k1, 2/1 RPC, p10.
Row 28: K11, p2, k1, p1, k1, p6, k1, p1, k1, p2, k11, p6.
Repeat Rows 1-24 for 5X/6X Cable Panel worked flat.
VIDEO TUTORIALS
- Long Tail Cast On >> Click Here for Video Help <<
- Knit Stitch (continental style) >> Click Here for Video Help <<
- Purl Stitch (continental style) >> Click Here for Video Help <<
- How to Cable: >> Click Here for Video Help <<
- Make 1 Increase >> Click Here for Video Help <<
- Kitchener Stitch >> Click Here for Video Help <<
- Mattress Stitch >> Click Here for Video Help <<
- How to Tink >> Click Here for Video Help <<
- How to Add a Lifeline >> Click Here for Video Help <<
- How to Bury Ends >> Click Here for Video Help <<
NOTES
- This sweater is sized using narrower or wider Cable Panel patterns. Be sure to follow the Cable Panel pattern for your desired size.
- Cable Panel and Seed Stitch patterns are given for flat as well as circular knitting. The body of the sweater is worked circularly, while the top portion (past the armholes), as well as gauge swatches, are worked flat.
SAZERAC CABLE SWEATER PATTERN
BODY
Bottom Edging
Cast on 120 (144, 168 , 192, 228) sts.
Join round being careful to not twist cast-on edge, and mark first st.
Work 5 rounds in Seed Stitch.
For First 2 Sizes Only:
Next Round (inc round): * M1, work 1 st in established Seed st, M1, work 6 (8) sts in established Seed st, M1, work 8 (8) sts in established Seed st, M1, work 5 (7) sts in established Seed st, pm; repeat from * 5 more times – 144 (168) sts.
For Last 3 Sizes Only:
Next Round (inc round): * Work 1 (1, 1) sts in established Seed st, M1, work 2 (2, 2) sts in established Seed st, M1, work 9 (10, 12) sts in established Seed st, M1, work 3 (4, 5) sts in established Seed st, M1, work 2 (2, 2) sts in established Seed st, M1, work 3 (5, 5) sts in established Seed st, M1, work 8 (8, 11) sts in established Seed st, pm; repeat from * 5 more times – 204 (228, 264).
For All Sizes:
Note: Be sure that the beginning of round marker is a different color or design than the other five markers which will be used to separate the Cable Panels.
Establish Cable Panels
Next round: * Work Row 1 of the Cable Panel for your chosen size across next 24 (28, 34, 38, 44) sts, slm; repeat from * 5 more times.
Continue working around the six established and marked Cable Panels until a total of 5 (4, 3.5, 3.5, 3.5) Cable Panel repeats, or 80 (80, 84, 84, 98) rounds (not including Bottom Edging) have been worked.
Grab the VIP Upgrade Now at this limited time low price
SEPARATE FOR ARMHOLES
Remove beginning of round marker, slip first 2 (2, 3, 3, 3) sts (to be worked later with Back), and cut yarn.
The front and back sleeves of the Sazerac are work flat in rows. Be sure to use the cable panel chart for the size you’re making to maintain the established pattern for the sweater or read the worked flat written instructions for this part of the sweater. If you have not already downloaded the individual charts, the download link can be found in the pattern stitches section above. There is a chart for each individual size.
❣️TIP: While knitting the front and back sleeves, it’s recommended to maintain or place markers between the cable panels, similar to what you did for the body, to assist in maintaining the correct pattern sequence.
Front Sleeves
With new yarn, cast on 10 (12, 14, 16, 19) sts, place these sts on a holder, cut yarn, and set aside for right Sleeve.
Set up a second holder the same way for left Sleeve.
For Size S/XS only:
Next row (front Sleeve setup row, RS): Working across first 8 sts on a holder, k1, 2/1 LPC, p4 (these 8 sts are the last 8 sts of Row 1 of Cable Panel), pm, k2 from holder, work in established Cable Panels across next 70 sts on needle, working across second holder, k2, p4, 2/1 RPC, k1 (the last 12 sts worked are the first 12 sts of Row 1 of Cable Panel) – 92 sts.
Place 72 sts still on the needle on a holder, scrap yarn, or a spare needle for Back.
For Size M/L only:
Next row (front Sleeve setup row, RS): Working across first 10 sts on a holder, k1, 2/1 LPC, p6 (these 10 sts are the last 10 sts of Row 1 of Cable Panel), pm, k2 from holder, work in established Cable Panels across next 84 sts on needle, working across second holder, k2, p6, 2/1 RPC, k1 (the last 14 sts worked are the first 14 sts of Row 1 of Cable Panel) – 108 sts.
Place 84 sts still on the needle on a holder, scrap yarn, or a spare needle for Back.
For Size XL/2X only:
Next row (front Sleeve setup row, RS): Working across first 11 sts on a holder, [k1, p1] 3 times, 2/1 RPC, p2 (these 11 sts are the last 11 sts of Row 13 of Cable Panel), pm, k3 from holder, work in established Cable Panels across next 102 sts on needle, working across second holder, k3, p2, 2/1 LPC, [p1, k1] 3 times (the last 17 sts worked are the first 17 sts of Row 13 of Cable Panel) – 130 sts.
Place 102 sts still on the needle on a holder, scrap yarn, or a spare needle for Back.
For Size 3X/4X only:
Next row (front Sleeve setup row, RS): Working across first 13 sts on a holder, p1, [k1, p1] 3 times, 2/1 RPC, p3 (these 13 sts are the last 13 sts of Row 13 of Cable Panel), pm, k3 from holder, work in established Cable Panels across next 114 sts on needle, working across second holder, k3, p3, 2/1 LPC, p1, [k1, p1] 3 times (the last 19 sts worked are the first 19 sts of Row 13 of Cable Panel) – 146 sts.
Place 114 sts still on the needle on a holder, scrap yarn, or a spare needle for Back.
For Size 5X/6X only:
Next row (front Sleeve setup row, RS): Working across first 16 sts on a holder, k1, [p1, k1] 4 times, 2/1 RPC, p4 (these 16 sts are the last 16 sts of Row 15 of Cable Panel), pm, working across last 3 sts from holder and first 3 sts on needle, 3/3 RC, work in established Cable Panels across next 126 sts on needle, working across next 3 sts on needle and first 3 sts on second holder, 3/3 RC, working across last 16 sts of second holder, p4, 2/1 LPC, k1, [p1, k1] 4 times (the last 25 sts worked are the first 25 sts of Row 15 of Cable Panel) – 170 sts.
Place 132 sts still on the needle on a holder, scrap yarn, or a spare needle for Back.
For All Sizes:
Continue in established Cable Panels for 23 (19, 23, 23, 27) more rows. At this point you will be following the flat panel instructions as opposed to the in-the-round instructions, so be sure to continue from the correct row number, which corresponds with the next round number you would have worked in the pattern.
Back Sleeves
With new yarn, cast on 10 (12, 14, 16, 19) sts, place these sts on a holder, cut yarn, and set aside for right Sleeve.
Set up a second holder the same way for left Sleeve.
Work Sleeve setup row same as for Front, then continue in established Cable Panels for 33 (33, 37, 37, 41) more rows.
Front Neck and Shoulders
Next Row (Neck Edging setup row, RS): Work 31 (37, 45, 51, 60) sts in established Cable Panels, pm, work 30 (34, 40, 44, 50) sts in Seed st removing any markers along the way, pm, work 31 (37, 45, 51, 60) sts in established Cable Panels.
Work in established Cable Panels and Seed st for 3 (3, 5, 5, 7) more rows.
Next Row (separate for Shoulder, RS): Work 31 (37, 45, 51, 60) sts in established Cable Panels, slm, work 4 (4, 6, 6, 8) sts in Seed st, bind off next 22 (26, 28, 32, 34) sts, work 4 (4, 6, 6, 8) sts in Seed st, slm, work 31 (37, 45, 51, 60) sts in established Cable Panels.
Right Front Shoulder
Work in established Cable Panels and Seed st for 11 (15, 17, 17, 19) more rows, then cut yarn and place all sts on a holder, removing any remaining markers.
Left Front Shoulder
With WS facing, join new yarn, work in established Cable Panels and Seed st for 11 (15, 17, 17, 19) more rows, then cut yarn and place all sts on a holder, removing any remaining markers.
Back Neck and Shoulders
Next Row (Neck Edging setup row, RS): Work 31 (37, 45, 51, 60) sts in established Cable Panels, pm, work 30 (34, 40, 44, 50) sts in Seed st removing any markers along the way, pm, work 31 (37, 45, 51, 60) sts in established Cable Panels.
Work in established Cable Panels and Seed st for 3 (3, 5, 5, 7) more rows.
Next Row (separate for Shoulder, RS): Work 31 (37, 45, 51, 60) sts in established Cable Panels, slm, work 4 (4, 6, 6, 8) sts in Seed st, bind off next 22 (26, 28, 32, 34) sts, work 4 (4, 6, 6, 8) sts in Seed st, slm, work 31 (37, 45, 51, 60) sts in established Cable Panels.
Left Back Shoulder
Work in established Cable Panels and Seed st for 1 (1, 3, 3, 5) more rows, then cut yarn and place all sts on a holder, removing any remaining markers.
Right Back Shoulder
With WS facing, join new yarn, work in established Cable Panels and Seed st for 1 (1, 3, 3, 5) more rows, then cut yarn and place all sts on a holder, removing any remaining markers.
FINISHING
Graft right Shoulder sts together using Kitchener Stitch as follows (also see Video Tutorials):
Note: if you want to Mattress stitch the shoulder together that is totally okay, just bind off all the stitches and proceed to seam together.
For Kitchener Stitch: Hold both needles or holders together in your left hand with RS facing out, and join yarn in first stitch on the back needle.
Cut a long tail from the working yarn (about 4 times the width of the fabric to be joined), and thread tail into yarn needle.
Step 1: Insert yarn needle purlwise into first st on front needle and pull it through, leaving st on the knitting needle.
Step 2: Insert yarn needle knitwise into first st on the back needle and pull it through, leaving st on the knitting needle.
Step 3: Insert yarn needle knitwise into first st on front needle and pull it through, then drop this st off knitting needle.
Step 4: Insert yarn needle purlwise into first st on front needle and pull it through, leaving st on the knitting needle.
Step 5: Insert yarn needle purlwise into first st on the back needle and pull it through, then drop this st off knitting needle.
Step 6: Insert yarn needle knitwise into first st on the back needle and pull it through, leaving st on the knitting needle.
Repeat steps 3-6 only, pausing to pull sts taut and neaten the seam after every couple of inches. Be sure to always pause after a step 6 so as to not lose your place.
When 2 sts remain, work step 3, then step 5, then fasten off.
Graft left Shoulder the same way.
Sew bottom Sleeve seams (underarm seams) together using Mattress stitch.
Weave in all loose ends.
